About the DS200TCQCG1A
This DS200TCQCG1A printed circuit board product offering from General Electric was originally manufactured for the Mark V Turbine Control System Series. The Mark V Series that this DS200TCQCG1A PCB belongs to has specific applications in the management and control systems of popular and compatible wind, steam, and gas turbine automated drive assemblies.
This DS200TCQCG1A printed circuit board product offering is not the originally-developed product of its specific functional role to exist within the greater Mark V Series; that would be the DS200TCQCG1 parent Analog IO Expander Board missing this DS200TCQCG1A PCB's notable A-rated functional product revision.
Hardware Tips and Specifications
As with any General Electric printed circuit board made available to our new and reconditioned inventory here, Mark V Series or not, this DS200TCQCG1A PCB's intended Mark V Series functionality as an RST Overflow Board or Analog IO Expander Board is introduced through its normal Mark V Series assembly's acceptance of a specific series of functionality-inducing hardware components and component specifications. The GE RST Overflow Board DS200TCQCG1A is populated with:
- 24 jumpers
- 3 40-pin connectors
- The IDs assigned to the 40-pin connectors are JFF, JE, and 6PL.
- 3 34-pin connectors
- 1 16-pin connector
- ​​​​​​​The ID assigned to the 16-pin connector is JC.
​​​​​​​​​​​​​​The jumpers on the GE RST Overflow Board DS200TCQCG1A serve to enable the installer to configure the board for the exact needs of the facility. When the original board is installed, the installer will review the information in the installation guide provided with the board. It contains a description of the jumpers and how the position of the jumpers can change how the board processes. By conferring with the engineering staff at the facility, the installer can set the jumpers to better meet the requirements of the facility. This is part of the drive installation procedure and might require some pre-installation communications between the installer and representatives from the facility to decide how best to set the jumpers.
However, once done, this DS200TCQCG1A PCB's jumpers stay in place and further configuration is not necessary. This is especially helpful when you plan to replace the board due to the fact that the installed board is defective. The only configuration necessary is to set the jumpers on the replacement board to match the jumper positions on the old board. To do that place the old board on a flat and clean surface. Then, wear a wrist strap and remove the replacement board from the sealed static protective bag. Place the board next to the old board and compare the jumper positions.
The DS200TCQCG1A functional product number can be considered a decent primary source of pertinent DS200TCQCG1A Board hardware component and component specification information, coding for these specific details in a series of consecutive functional naming chunks. For example, the DS200TCQCG1A functional product number begins with the DS200 series tag dictating this DS200TCQCG1A PCB's normal Mark V Series assembly version as well as its domestic original manufacture location. Some of the other important hardware details revealed through this DS200TCQCG1A PCB's functional product number include its:
- TCQC functional product abbreviation
- Normal PCB coating style
- Group one Mark V Series product grouping
- A-rated primary functional product revision
