About the 590C/1100/6/0
590C-1100-6-0
The Eurotherm series of direct current motor control drives are a part of the Eurotherm 590 lineup. These devices come with several standard features across the line, such as the three separate components that make up these units. There is the 590 direct current Link Drive, the direct current contractor module, and then the series of alternating current fuses. The internal systems of the Eurotherm 590 series is also a standard, with the fiber optic communication capabilities, which are achieved via the Eurotherm fiber optic cable network.
This unit is designated under the ID 590C-1100-6-0, though it is more commonly labeled as 590C/1100/6/0. This unit is built with a Eurotherm standard 16 bit microprocessor. This microprocessor unit allows for several possible features to operate smoothly.
These features include the complex series of controlling algorithms that the 590C/1100/6/0 needs to achieve its function of controlling motors. These algorithms are unable to be replicated by any type of simple analog methods. The 590C/1100/6/0 model’s circuitry that handles its control capabilities is all configurable by software, which is designed around the standard software block units.
This device is outfitted with communication capabilities over serial link connections with other drive models, or even PCs, to grant the users access to advanced processing systems.
The 590C/1100/6/0 model is one of the Eurotherm modules that are largely interchangeable with others. Physically, this unit is designed with the standard measurements: a width of 250 millimeters, a height of 415 millimeters, and a depth of 180 millimeters.
