Product Description
The F0-04AD-1 is part of the DL05 and DL06 lines from Automation Direct. This particular component functions as a 4-Channel Analog Current Input card.
The F0-04AD-1 is designed to allow the DL05 or DL06 systems to read all four channels of the analog component in a single scan.
The F0-04AD-1 includes a removable terminal block located on its front faceplate. This block allows field wiring to remain in place when removing and replacing the module. Once the new module is installed, the removable terminal block can be re-installed on the front of the new component.
The F0-04AD-1 is designed as a plug and play component that fits into a standard Direct Logic rack system. The unit has an input range of zero to 20 mA, or it can be changed via jumper to 4 to 20mA. The J3 Jumper will determine this level. Default jumper settings will maintain a 4-20 mA signal source. Its absolute max raters are -30mA to +30 mA current input. It is designed for use within a temperature range of 0-60 degrees Celsius where the relative humidity is between 5 to 95%, non-condensing.
It is important to note this unit will not supply any power to field devices. Power to field devices will require power transmitters from the PLC.
Full specifications for this unit including wiring diagrams, transmitter impedance, and important information that should be read before beginning any sort of maintenance or installation procedure, can be found through Automation Direct manuals or user guides. These were supplied with your OEM purchase.