The DL05 Micro PLC Model D0-05AR has two RS–232C communication ports and 8 AC inputs and 6 relay contact outputs.
The D0-05AD features operating modes that are accessed through a switch on the device or are available from a handheld programming device or optional DirectSOFT 5 programming software. The modes enable programming functions.
The external power requirement is 95-240 VAC, 30 VA maximum. The input voltage range is 80-132 VAC, 47-63 Hz. The operating voltage range is 90-120 VAC, 47-63 Hz. Inputs are organized into two banks of four. Each bank has a common terminal.
The relay output voltage range is 5-264 VAC (47 -63 Hz), 5-30 VDC and the operating voltage range is 6-240 VAC (47-63 Hz), 6-27 VDC. Outputs are organized into two banks of three relay contacts. Each bank has a common terminal.
The ambient operating temperature is 32ºF-131ºF (0º to 55ºC) and the ambient humidity is 5 to 95% relative humidity (non-condensing).
Port 1 on the D0-05AR is a 6-pin modular connector that can be connected to a handheld programming device, an operator interface, or other device containing optional programming software, such as DirectSOFT 5. Port 2 is a 6-pin modular connector and it offers RS-232 communications only.
The DL05 Micro PLC D0-05AR offers data storage in V-memory in 16-bit registers and advanced internal diagnostics.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved