GP470-EG31-24V is a cUL marked unit produced by Pro-Face. The panels voltage endurance is AC 1000V (10mA for one minute) between the grounding terminal and the live wire. The isolation resistance is DC 500V (above 10 M Ohm) between the grounding terminals and the live wire. The GP470-EG31-24V is an amber monochrome touch panel. The display medium is a high-intensity EL Display. The resolution of this panel has 640 x 400 pixels, with a display area of 192W x 120H. This panel has Blink or Reverse video along with two levels of brightness control. The input voltage is DC 24 plus or minus 20%, with a power consumption of under 50W (TYP 20W). The touch panel offers 32x20 keys per screen with one or two point touch. This panel supports a variety of languages including Chinese, Korean, Taiwanese, Japanese, and ASCII. The panel uses RS 232C or RS 422 series interface cables. The GP470-EG31-24V also has the following connector options a power input terminal that is the input and ground for the AC power cable, an auxiliary input and output or AUX which operates the system alarm, touch switch, RUN output signals, buzzer, and the remote reset input signals. There is also a tool connector that can be used for a barcode reader, a memory loader, or a data transfer cable. There is also a hook up for a printer. Pro-Face has published a number of instruction manuals as well as data sheets for this panel. Please refer to them for proper operation.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved