Product Description
603503-101 is a MACRO ring connector accessory developed by Delta Tau. Designed to interface with PMAC 2 systems, this accessory board can easily install into any PMAC 2 PC. The board provides a communications medium for the PMAC 2 PC and the MACRO ring. MACRO rings are capable of controlling both motion axes as well as external I/O modules. This half sized expansion board can be mounted in the ISA slot, but does not communicate via the ISA bus. A 34 strand flat cable serves as the hardwire connection from the board to the PMAC system.
Provided installation and safety parameters should be followed to prevent any device damages. As a sensitive device, 603503-101 requires careful handling and installation. Only trained personnel who are qualified to install controller boards should handle this device. All static electricity should be discharged from hands before touching the board. Static energy can transfer to the circuits and corrode or disrupt them, resulting in device errors.
The board should only be installed in appropriate enclosures. Acceptable environments include the PMAC PC as well as electrical cabinets. These protect the system from environmental concerns, such as debris, temperatures, and moisture. Conditions in the operating facility can affect the output produced by the board, so they should be monitored to maintain safe levels. When operating, 603503-101 requires a controlled climate to reduce device disruption. Ambient temperatures can safely range from 0℃ to 45℃, or 32℉ to 113℉. Refer to the PMAC 2 series manual and the device datasheet for a complete installation guide. Delta Tau, the manufacturer, was the original technical support provider for this device.
Our knowledgeable staff at AX Control is available to assist with all of your automation needs. Please contact our sales team for current pricings on all parts and repairs.