Product Description

603182-102 is a ultralite programmable multi axis controller developed by Delta Tau. This controller was designed to specifically interface with the Turbo PMAC series of boards. Rather than using an on board axis, the unit relies on the MACRO ring found in the PMAC system to move remote axes. An 80 MHz central processing unit (CPU) and a 16 node interface IC intelligently controls the connected MACRO ring. Up to 32 axes can be controlled using this board and the MACRO ring. System memory is integrated into the device for job and program storage. 124K x 24 SRAM is available for both assembled program memory and user data memory. An additional 1K x 8 of flash memory is built in for firmware storage and user backups. Serial I/O communication is available via either a RS232 or RS422 connection.

To maintain the integrity of the board be sure to follow all provided installation and safety parameters. Only qualified personnel should be permitted to handle and install this controller as it can be damaged easily. Improper handling of 603182-102 can result in device damage or shortage of circuits. To prevent most electrical damages, be sure to discharge all static electricity before handling the device. Be sure to refer to the series user manual as well as the device datasheet for a complete guide to installing and operating the board. The manufacturer, Delta Tau, provided original technical support for this device.

Our knowledgeable staff at AX Control is ready to help you with all of your 603182-102 needs. Current prices for all advertised parts and repairs are available by contacting our office via phone or email