COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
Before you install the In-Sight IS540100 Vision System, consider that the device must be supplied with 24VDC ±10% power at 500mA maximum.
The IS540100 contains 128MB non-volatile flash memory and unlimited storage through a remote network device. The image processing is 256 MB. The resolution is 1024x768. The sensor is ⅓-inch CCD. The weight is 350 g (12.3 oz.) with the lens cover installed and without the lens. The IS540100 features a die-cast aluminum housing.
The In-Sight IS540100 Vision System features one 10/100 BaseT Ethernet port with an RJ-45 connector and one RS-232C port for serial communications. The breakout cable provides the connection for serial communications, power, trigger, and high-speed outputs.
The In-Sight IS540100 Vision System features Power, Network Status, and Network Traffic indicator LEDs. It also contains two user-configurable indicator LEDs. The image bit depth of the In-Sight IS540100 Vision System is 256 grey levels (8 bits/pixel) at 17 full frames per second.
The operating temperature of the IS540100 is 0°C to 45°C (32°F to 113°F). The operating humidity is 95%, non-condensing (operating and storage). The Ingress Protection rating is IP67 (with appropriate lens cover installed). The vibration rating (shipping and storage) is 10 G from 10-510 Hz with 150 gram lens per IEC 68-2-6. The shock rating (shipping and storage) is 80 G shock with 150 gram lens attached per IEC 68-2-27.
The minimum firmware requirement for the IS540100 is In-Sight version 4.4.3.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved