COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
The Automation Direct Facts Engineering Koyo T1F-16RTD is a resistance temperature detector (RTD) input module. A member of the Terminator I/O series, this sixteen channel device can interface with a number of peripheral devices and logic controllers. Incoming temperatures are displayed as ℃ or ℉, with a resolution of ±0.1℃. These readings require no extra scaling or calculations by the user.
Unnecessary circuit overloading can be managed by managing incoming voltage information. A base power requirement of 150 mA (max), 5 VDC is necessary for the device to function. T1F-16RTD allows a common mode range of 0 to 5 VDC, with a sustained absolute maximum rating of ±50 VDC. Six different input ranges are supported by the module, with selection dependent upon the need of the user. Ranges included are Pt100, Pt1000, jPt100, Type CU - 10, Type CU - 25, and 120 Ω Nickel. Temperature inputs accepted by the module are dependent upon input type selected. Some of these types can register readings as low as -328℉, or -200℃, while others can register ones as high as 1562℉, or 850℃. A separately sold mounting base is required to complete device installation.
Following all outlined storage and installation protocols help to prevent the device from damages. Although the module can register extreme temperatures, the device itself is not suited for extreme environments. When T1F-16RTD is operating, ambient temperatures can safely dip as low as 0℃, or 32℉, and jump as high as 60℃, or 140℉. If the device is not in use and placed in storage, temperatures of that facility should also be monitored. Acceptable storage temperatures range from -20℃ to 70℃, or -4℉ to 158℉. All wiring and installation parameters can be found in the device manual and datasheet. All technical support for this device was provided by the original manufacturer.
AX Control is available to assist with all of your automation needs. Pricing for all parts and repairs is available by contacting our office.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved