COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
T1F-16DA-1 is an analog current output module developed by Automation Direct, Facts Engineering, and Koyo. This sixteen channel module is a member of the Terminator I/O series. Devices from this series offer communications capabilities with a number of peripheral devices and logic controllers. A single ended output is integrated into the drive, with all channels ending at a single common. Outgoing digital signals are then converted by the 12-bit resolution into analog current signals digestible by the receiving device.
Monitoring the voltage and current levels of T1F-16DA-1 help to maintain the module. The device supports both 0 to 20 mA and 4 to 20 mA output ranges. Peak output voltage of the module is capped at 30 VDC, as is the maximum loop supply. A base power requirement of 75 mA at 5 VDC is needed for proper device operation. When preparing the module, use the separately sold mounting base for proper installation. The mounting rack integrates a key design feature of the module, an easy snap function. This snap ability allows modules to be installed and removed instantaneously, without affecting the entire device.
Following all installation and safety parameters is integral in preserving the device. When mounting the device, be sure to install it horizontally. This will allow air to flow freely around the module, acting as a cooling agent. Temperatures of the operating facility should be monitored to maintain an acceptable range. Ambient temperatures can range as low as 32℉, or 0℃, and as high as 140℉, or 60℃. When the module is not in use, storage temperatures still can affect the device. Safe storage temperature ranges from -4℉ to 158℉, or -20℃ to 70℃, should be maintained. The user manual and device datasheet contain a complete list of all installation and wiring protocols. The manufacturers provided original technical support for the module.
AX Control is available to help with all of your automation needs. Please contact our office by phone or email for current pricings on parts and repairs.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved