T1F-16AD-2 is an analog voltage input module manufactured by Automation Direct, Facts Engineering, and Koyo. The sixteen channel input device is a part of the Terminator I/O series of modules. Members of this series are capable of communicating with a number of devices and logic controllers. A single-ended device, all sixteen of the channels terminate into one common. A 14-bit resolution allows the device to precisely convert incoming data into digital signals. Two input ranges are supported by the module, 0-5V and 0-10V ±5V, ±10V, accompanied by a frequency range of -3db at 500Hz, -20db/decade.
Careful monitoring of the input voltage can preserve the integrity of T1F-16AD-2. The module includes a fault protected input, providing surge protection to the device. This protection allows for an absolute maximum rating of 130V (rms) or 100VDC. A base power requirement of 75mA at 5VDC is needed to operate the module. Before installing the module, purchase the corresponding mounting rack to ensure proper installation. When placed in the correct rack, removal of the device is simple. The design of the mounting features a snap functionality, allowing modules to be easily removed and replaced from the PLC.
The integrity of the module depends upon following proper installation and storage protocols. When mounting T1F-16AD-2, install the device horizontally. This allows air to freely flow around the module, acting as a cooling mechanism. Temperatures of the facility housing the module should also be monitored regularly. When operating, ambient temperatures can range as low as 32℉, or 0℃, and as high as 131℉, or 55℃. Temperatures can fluctuate more widely when in storage, with acceptable ranges from -4℉ to 158℉, or -20℃ to 70℃. The user manual and device datasheet contain all installation and wiring protocols for the module. Technical support for this device was provided by the original manufacturer.
AX Control is happy to assist with all of your automation needs. Please contact our office by phone or email for current pricings on all parts and repairs.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved