The Automation Direct Facts Engineering Koyo T1F-08DA-2 is an analog voltage output module. This eight channel device is a part of the Terminator I/O series. This allows the module to interface with numerous devices and programmable logic controllers. Outgoing digital signals from the PLC are converted by this module to analog voltage using the integrated 12-bit resolution.
Current and voltage inputs and outputs should be monitored to prevent T1F-08DA-2 from overloading. The module supports 0 to 5V and 0 to 10V, ±5V, ±10V output voltage ranges, with peak output voltage measured at 15 VDC. A required base power of 75 mA at 5 VDC is necessary to power the module. When installing the module into its controller, be sure to have purchased the separate mounting rack. The rack allows for streamlined installation and removal processes. Inserting and removing the module requires a simple click function, allowing the user to make changes as necessary.
To maintain the device, be sure to follow all outlined storage and installation parameters. T1F-08DA-2 should be installed horizontally when placed in its mounting. This orientation allows air to circulate around the device, preventing it from overheating. Ambient storage and operating temperatures should be monitored as well, to prevent any unnecessary device damage. When operating, facility temperatures should fall no lower than 0℃, or 32℉, and raise no higher than 50℃, or 131℉. Storage temperatures offer a wider variation, with acceptable ranges falling between -20℃ and 70℃, or -4℉ and 158℉. Please refer to the user manual and device datasheet for all installation and wiring instructions. Automation Direct and Koyo provided original technical support for the device.
AX Control is happy to assist with your T1F-08DA-2 needs. Please contact our office to receive current pricings on new parts, replacements, and repairs.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved