Product Description
T1F-08DA-1 is an analog current output module developed by Automation Direct, Facts Engineering, and Koyo. This eight channel module belongs to the Terminator I/O series, allowing it to communicate with a number of programmable logic controllers and peripheral devices. A single common acts as the termination point for all eight of the module’s channels. These outgoing digital signals are converted with a 12-bit resolution into analog current signals, compatible with the communicating device.
Monitoring voltage and current inputs and outputs reduces the risk of damaging the device. A required base power of 75 mA at 5 VDC is necessary for device functionality. T1F-08DA-1 supports two output ranges, with those ranges measuring 0 to 20 mA and 4 to 20 mA. 30 VDC is the peak output voltage the module is capable of sending. Simple installation and removal of the module is a key design feature of the Terminator series. A separately sold mounting rack is required for correct installation of all modules. Once installed in the rack, removal only requires snapping it out of the mount, leaving room for a replacement.
Follow all outlined installation and safety instructions to maintain the device. When installing, mount the device horizontally. This will allow the surrounding air to circulate, cooling the module. Ambient temperatures of the operating facility should range from 32℉ to 131℉, or 0℃ to 55℃. Should the module be placed in storage, temperatures there can range as low as -4℉, or -20℃, and as high as 158℉, or 70℃. Refer to the user manual and device datasheet for a complete outline of wiring and installation parameters. Technical support for T1F-08DA-1 was originally provided by the manufacturers.
AX Control is happy to help with all of your automation needs. Current pricing for parts and repairs is available by contacting our office.