The Automation Direct Facts Engineering Koyo T1F-08AD-2 is an eight channel analog voltage input module. A member of the Terminator I/O series, this module is designed to interface with a number of other modules, peripheral devices, and programmable logic controllers. A single common acts as the termination spots for all eight of the available channels. The module accepts two input ranges, 0-5 V and 0-10 V, ±5V, ±10V. A frequency response of -3 db at 500 Hz, -20 db/decade can be expected with the module.
Input voltages should be monitored to preserve the circuitry of T1F-08AD-2. Base power requirements of the module measure at 75 mA at 5 VDC. A fault protected input helps to maintain the device, with an absolute maximum rating of 130 V (rms) or 100 VDC. Mounting the module is a simple task, but the device mounting base must be purchased separately. Terminator series devices offer a snap installation and a snap removal process. Modules and other parts can be quickly interchanged for repairs or replacements.
Be sure to follow all outlined storage and installation parameters to preserve T1F-08AD-2. When installing, be sure to mount the module horizontally. This mounting will ensure that air can properly circulate around the module, preventing device damage. Ambient temperatures of the operating facility should also be carefully monitored. Temperatures can safely range from 32℉ to 131℉, or 0℃ to 50℃. Storage temperatures have a wider variation, with sustained temperatures able to range from -4℉ to 158℉, or -20℃ to 70℃. Refer to the series manual and device datasheet for all installation and wiring protocols. Technical support for this module was originally provided by the manufacturers.
AX Control is happy to assist with your T1F-08AD-2 needs. Pricing for parts and repairs can be obtained by contacting our office.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved