T1F-08AD-1 is an eight channel analog current output module developed by Automation Direct, Facts Engineering, and Koyo. A member of the Terminator I/O series, this module can interact with a number of other modules, CPUs, and PLCs. All eight of the channels are single ended, terminating in a single common. A 14-bit resolution maintains precise measurements as inputted currents are converted into digital signals. The module offers three input ranges: -20 to 20 mA, 0 to 20 mA, and 4 to 20 mA. Expect a frequency response of -3 db at 500 Hz, with -20db/decade when operating the device.
Be sure to monitor the voltage and current input levels to avoid overloading the circuits. The base power requirements of the module register 75 mA at 5 VDC. The absolute maximum input rating for T1F-08AD-1 is 8V. A separately sold mounting base is needed to properly install the module. These bases can be found under the part numbers T1K-08B OR T1K-08B-1. Terminator series modules and controllers feature a simple snap to install and snap to remove feature, with part replacement happening seamlessly.
Be sure to follow all outlined storage and installation procedures to maintain the device. When installing T1F-08AD-1, be sure that it is mounted horizontally. This horizontal mounting allows air to circulate freely around the drive, keeping it from overheating. Ambient temperatures of the operating facility should be monitored by the user. Operating temperatures can range as far low as 0℃, or 32℉, and as high as 55℃, or 131℉. Storage temperatures, on the other hand, have a wider variation, with acceptable ranges between -20℃ and 70℃, or -4℉ and 158℉. All installation and wiring parameters can be found in the corresponding series manual and device datasheet. Automation Direct and Koyo provided original technical support for this module.
AX Control is available to assist you with all of your automation needs. Please contact our office by phone or email for current pricing on parts and repairs.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved