The operating environment of the H0-CTRIO High Speed Counter Interface is 32℉ to 140℉ (0℃ to 60℃) and humidity (non-condensing) is 5% to 95%. The H0-CTRIO provides 2500 V I/O-to-logic isolation, 1000 V among input channels and all outputs.
The H0-CTRIO High Speed Counter Interface features 4 DC sink/source inputs at 100 kHz maximum. The input voltage range is 9-30 VDC and the maximum voltage is 30 VDC.
The H0-CTRIO features 2 points, isolated, either both current sourcing or both current sinking field-effect transistors (FET) outputs. The voltage range is 5 VDC-36 VDC and the maximum voltage is 36 VDC. The maximum load current is 1 A per point. The pulse output control range is 20 Hz to 25 Hz.
The H0-CTRIO features 5 LED indicators on the front of the device.
OK Model OK.
ERR User program error.
A Channel 1 function 1 resource state.
B Channel 1 function 2 resource state.
Y0 and Y1 Output status.
The CTRIO Workbench tool is used to configure the H0-CTRIO. You must perform the configuration with the PLC in RUN mode. Use the H0-CTRIO Workbench to assign the input and output points, map the CPU to memory, and configure other functions Be sure to configure the H0-CTRIO in program mode. Also, be sure to map the memory before starting the program.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved