COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
The Automation Direct Facts Engineering Koyo F0-08ADH-2 is an eight channel analog voltage input module. This optional module is one of thirty designed to interface with DirectLogic 05 and DirectLogic 06 programmable logic controllers. Specifically, this module creates digital signals from incoming analog voltage signals. The digital signals are a digestible way for the controllers to read analog signals. The internal CPU updates each of the eight channels in a single scan. Designed with ease of use in mind, the terminal block can be easily removed without interfering with the unit’s wiring.
Integrated systems like active analog filtering and microcontrollers produce high quality conversions for precise measurements. Since the module communicates with microcontrollers, there are specific software requirements that must be met to ensure proper function. The needed software depends upon the logic controller that F0-08ADH-2 is installed in. When in use in a DL05 PLC, the module needs firmware version 5.20 or later and DirectSOFT32 version 3.0c or later to run. Conversely, when installed in a DL06 controller, it requires firmware version 2.30 or later and DirectSOFT32 version 4.0, build 16 or later to operate.
Following proper installation and storage parameters is necessary to maintain F0-08ADH-2. When installed in a controller, ambient temperatures can range from 32℉ to 131℉, or 0℃ to 55℃. If the module is not in use, storage temperatures can fall as low as -4℉, or -20℃, and can raise as high as 158℉, or 70℃. Technical support for this module was originally provided by Automation Direct. All safety and installation guidelines can be found in the corresponding manual and datasheet.
AX Control is available to assist with all of your F0-08ADH-2 needs. Please call or email our office for pricing on part repairs and replacements.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved