The Automation Direct Facts Engineering Koyo F0-08ADH-1 is an optional 8 channel analog current input module. This unit is compatible with programmable logic controllers from both the DirectLogic 05 and DirectLogic 06 series. It works to convert analog signals into compatible 16-bit digital signals digestible by the controller. Each scan of the PLC’s internal CPU updates all eight of the module’s channels. The terminal blocks are easily installed, with removal available without rewiring the device.
Data conversions made by F0-08ADH-1 are accurate and precise. This accuracy is ensured by a combined microprocessor and active analog filtering. To interact with the integrated processor, up-to-date software requirements should be met. Should the module operate within a DL05 PLC, firmware version 5.20 or later and DirectSOFT32 version 3.0c or later is required to run. If using DL06 controller instead, firmware version 2.30 or later and DirectSOFT32 version 4.0, build 16 or later is needed.
The integrity of F0-08ADH-1 is dependent upon following all recommended storage and installation parameters. When placed in storage, temperatures can range from -4℉ to 158℉, or -20℃ to 70℃. Operating temperatures, on the other hand, should be closely monitored. Ambient temperatures of the operating facility should fall no lower than 32℉, or 0℃, and raise no higher than 131℉, or 55℃. Technical support for the module was provided by Automation Direct originally. All safety and installation guidelines can be found in both the user manual and datasheet.
AX Control is available for all your F0-08ADH-1 needs. Please call or email our office for pricing on part repairs or replacements.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved