The Automation Direct Facts Engineering Koyo F0-04DAH-2 is a four channel analog voltage output module. A high definition unit, the module is compatible with programmable logic controllers from the DirectLogic 05 and DirectLogic 06 series. The module works to convert outgoing digital signals from the PLC into an analog voltage signal. The internal CPU of the controller writes to all four channels of the module in a single scan. Modules for the DL05/06 series PLCs are designed for easy access. An easily removable terminal block allows the user to detach the module without having to interfere with the wiring.
F0-04DAH-2 requires specific software requirements to run properly. The software is dependent upon which of the two controller series the module is installed in. When installed in a DL05 controller, the module requires DirectSOFT32 version 3.0c (or later) and firmware version 5.20 (or later). If installed in a DL06 series PLC, it needs DirectSOFT32 version V4.0 build 16 (or later) and firmware version 2.30 (or later). The module supports a dynamic full 16-bit resolution that allows for precise and clear data transmission to occur between devices.
Proper storage and installation parameters should be followed to preserve the module. When not in use, storage temperatures can fall as low as -4℉, or -20℃, and can raise as high as 158℉, or 70℃. Once installed in a DL05/06 logic controller, regulating ambient temperatures around the unit is necessary. Operating temperatures can range between 32℉ and 131℉, or 0℃ and 55℃. Technical support for F0-04DAH-2 was originally provided by Automation Direct. Be sure to refer to the user manual and datasheet for all safety and installation guidelines.
AX Control is happy to speak with you about your F0-04DAH-2 needs. Please call or email AX Control for pricing on repairs and replacements.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved