The Automation Direct Facts Engineering Koyo F0-04AD-2 is an optional module compatible with DirectLogic 05 and 06 programmable logic controllers. With over 30 modules created for the DL05/06 series, the PLCs can fit into almost any necessary role. This module allows a DL05/06 controller to accept a four channel analog input. F0-04AD-2 inputs the analog signal and converts it to a signal that is processable by the PLC’s internal CPU. These input signal levels are adjustable via the J2 jumpers on the module. The signal levels are factory set to read 0-5VDC but are configurable to be read 0-10VDC.
F0-04AD-2 features a 12-bit resolution with another sign/diagnostic bit, a diagnostic bit, and two channel ID bits. Both DL05 and DL06 controllers can read the four channels in one scan. These analog inputs can serve as a process variable for the PLC. As a process variable, it can be used for the four PID loops on the DL05 and the eight PID loops on the DL06. Electrical noise is filtered from the signal by a microcontroller and onboard active analog filtering. By digitally processing the analog signal, F0-04AD-2 is able to maintain exact and precise device measurements.
As the module is a sensitive piece of computer equipment, proper storage is necessary to maintain the integrity of the unit. When operating, ambient temperatures can fall no lower than 0℃, or 32℉, and raise no higher than 60℃, or 140℉. Storage temperatures have a wider range, with the lowest temperatures ranging to -20℃, or -4℉, and the highest temperatures as high as 70℃, or 158℉. Automation Direct originally offered technical support for the module. All installation and wiring parameters can be found in the corresponding user manual and product datasheet.
AX Control is available for all of your F0-04AD-2 needs. Pricing for repairs and replacement modules can be found by calling or emailing AX Control.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved